BS EN 12953-3 2002
|
ID： |
C7FD8B69779B44CF816B00821F002E52 |
|
文件大小(MB)： |
1.74 |
|
页数： |
94 |
|
文件格式： |
|
|
日期： |
2013-6-1 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,12953-3:2002,Shell boilers —,Part 3: Design and calculation for,pressure parts,The European Standard EN 12953-3:2002 has the status of a,British Standard,ICS 27.060.30; 27.100,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:07:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,BS EN 12953-3:2002,This British Standard, having,been prepared under the,direction of the Engineering,Sector Policy and Strategy,Committee, was published,under the authority of the,Standards Policy and Strategy,Committee on 14 June 2002,. BSI 14 June 2002,ISBN 0 580 39851 X,National foreword,This British Standard is the official English language version of,EN 12953-3:2002. It partially supersedes BS 2790:1992 which will be,withdrawn on publication of BS EN 12953 Parts 1, 2, 3, 4, 5, 6, 8 and 9.,When the reference to this European Standard has been published in the,Official Journal of the European Communities (OJ), compliance with it will,confer a presumption of conformity with the essential requirements covered by,the standard in respect of the Pressure Equipment Directive.,The UK participation in its preparation was entrusted to Technical Committee,PVE/16, Shell boilers, which has the responsibility to:,A list of organizations represented on this committee can be obtained on,request to its secretary.,Cross-references,The British Standards which implement international or European,publications referred to in this document may be found in the BSI Catalogue,under the section entitled “International Standards Correspondence Index”, or,by using the “Search” facility of the BSI Electronic Catalogue or of British,Standards Online.,This publication does not purport to include all the necessary provisions of a,contract. Users of this publication are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,— aid enquirers to understand the text;,— present to the responsible international/European committee any,enquiries on the interpretation, or proposals for change, and keep the,UK interests informed;,— monitor related international and European developments and,promulgate them in the UK.,Summary of pages,This document comprises a front cover, an inside front cover, the EN title page,pages 2 to 90, an inside back cover and a back cover.,The BSI copyright date displayed in this document indicates when the,document was last issued.,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:07:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 12953-3,May 2002,ICS 27.060.30; 27.100,English version,Shell boilers - Part 3: Design and calculation for pressure parts,Chaudières à tubes de fumée - Partie 3: Conception et,calcul des parties sous pression,Gro遷asserraumkessel - Teil 3: Konstruktion und,Berechnung für drucktragende Teile,This European Standard was approved by CEN on 15 May 2002.,CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European,Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Management Centre or to any CEN member.,This European Standard exists in three official versions (English, French, German). A version in any other language made by translation,under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official,versions.,CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.,EUROPEAN COMMITTEE FOR STANDARDIZATION,COMITé EUROPéEN DE NORMALISATION,EUROP腎SCHES KOMITEE FüR NORMUNG,Management Centre: rue de Stassart, 36 B-1050 Brussels,. 2002 CEN All rights of exploitation in any form and by any means reserved,worldwide for CEN national Members.,Ref. No. EN 12953-3:2002 E,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue May 15 11:07:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI,EN 12953-3:2002 (E),2,Contents,Page,Foreword4,1 Scope .5,2 Normative references ..5,3 Terms and definitions..5,4 Symbols and abbreviations ..5,5 General..5,5.1 Boilers 5,5.2 Hot-water generator……
……